Extractor kit KEXIM parts:
COUNTER-TORQUE WRENCH, 200 Ncm
Wrench with large torque that breaks the join between the bone and implant, making the extraction process easier. When torque over 200 Ncm is applied, the wrench forms an angle and prevents progress. Back to the original position using a cylindrical component in the kit.
EXTRACTORS*
Five parts with varying widths and lengths to adapt to the range of implants on the market. If necessary due to the depth of the connection, they can be cut to size using a diamond disc cutter. They are disposable to ensure maximum performance.
*Never exceed 70 Ncm with the narrowest one (EXIME - Nº 0). In this case, replace LLT200 with LLMQ.
EXTENDERS
Set of counter-torque wrench extenders (long, short, extralong) for different clinical situations.
MDPT1
Handle to carry the extractor once the extender has been fitted.
Extractor kit KEXIM 2 parts:
This kit is available for those users that worked previously with KEXIM.
DRILL DRL-E
Drill designed to prepare the bottom of the connection making sometimes easier the fitting in the most hardy area.
EXTRACTORS EXIML-A AND EXIML-B
Two new references with a greater active surface for interna conical and very deep connections, increasing their mechanical resistance.
Additional components:
Not included in the kit, sold separately.
INEXIM-A
Extractor for BTI Internal connection implants.
EXIM 5 AND EXIM 6
Extractors to increase compatibility with other connections available on the market.
