ENA Heat composite heater

The ENA composite heater will lower the viscosity of the composite material to modify the flow and adaptability. It will also increase the conversion rate of light cured composite, allowing for a faster and more complete polymerization.

ENA HEAT will sufficiently soften ENA HRi® composite so that it can be used for bonding ceramic or composite veneers. ENA HRi® has superior physical properties and less shrinkage than flowable composites and eliminates the need to purchase additional materials for luting veneers.

ena heat

ENA HRi® Bio Function basic esthetic kit

This kit includes necessary materials to get started with ENA HRi to complete restorations, without the complete shade selection for more advanced and complex anterior restorations.

  • 3 – Achromatic enamel shades: UE2, UE3, BF3
  • 3 – Fluorescent dentin shades: BD2, BD3, BD4
  • 1 – ENA HRi® Flow BisGMA-free 2g syringe: UD2

  • 1 – Plexiglass 9-syringe holder (optional)
  • 1 – ENA Shiny polishing kit (optional)
  • 1 – ENA HRi Bio Function waiting room cardboard foldout (optional & free)

(Available in 5g syringes OR 12 x 0.3g tips)
ena hri basic kit

ENA HRi® Bio Function esthetic kit

This kit includes all the materials used during training in the Vanini stratification technique and will allow clinicians to complete all esthetic restorations.

  • 5 – Achromatic enamel shades: UE1, UE2, UE3, BF2, BF3
  • 5 – Fluorescent dentin shades: BD1, BD2, BD3, BD4, BD5
  • 1 – ENA HRi® Flow BisGMA-free (2g syringe): UD2
  • 4 – Characterization shades (5g syringes): IM (Intensive Milky), IWS (Intensive White Spot), OA (Opalescence Amber), OBN, (Opalescence Blue)
  • 1 – ENA HRi® Stain (2g syringe): Brown2 Dark
  • 1 – ENA Shiny polishing kit
  • 1 – Plexiglass 26-syringe holder (included if you choose the syringe kit)

(Enamel & Dentin shades: available in 5g syringe OR 12 x 0.3g tips)
ena hri complete kit

ENA HRi® dentin shades

Fluorescent dentin shades are designed to build up dentin mass for all restorations. The shades are graded in chroma, ranging from 0 (lightest) through 6 (darkest). Larger restorations benefit esthetically from a progressive build up from darker to lighter shades (using 1, 2 or 3 dentin shades per restoration).

UD0, UD0.5, UD1, UD2, UD3, UD3.5, UD4, UD5, UD6

(Available in 5g syringe OR 12 x 0.3g tips)

hri dentin
hri dentin

hri dentin

ENA HRi® enamel shades

Achromatic Enamel shades are use to replace existing enamel in the same thickness as original enamel (generally 0.5 mm on the labial surface), or for diastema closures, veneers, etc.

  • UE1 – low value (darker)
  • UE2 – medium value (universal adult)
  • UE3 – high value (bright younger dentition)

(Available in 5g syringe OR 12 x 0.3g tips)
hri enamel

hri enamel

ENA HRi® Intensive shades

Intensives occurs more frequently in young patients and represent hypo-mineralized areas of enamel that appear white. They can be: spot, small clouds, snow flakes, or horizontal bands. They can be preproduced with ENA HRi® intensive shades.

  • IM – Intensive Milky
  • IWS – Intensive White Spot

(Available in 5g syringe)
hri intensive

hri intensive

Patented by Dr. Lorenzo Vanini

ENA HRi® Opalescent shades

Also restricted to the incisal third and to where free enamel is located, these blue and amber hues create and exhibit different shades that are reproduced with ENA HRi® Opalescent shades.

  • OA – Opalescent Amber will reproduce the natural amber
  • OBN – Opalescent Blue will reproduce the natural blue

(Available in 5g syringe)
hri opalescent

hri opalescent

Patented by Dr. Lorenzo Vanini

ENA HRi® Stain Characterization shades

Characterizations affect both dentin and enamel. There are 5 types: two in the dentin (mamelon and band) and three in the enamel (cracks in older teeth, margin in young teeth, stains)

ENA HRi® Stain characterization shades allow the clinician to match specific characterizations of a patient’s adjacent dentition.

White, Blue, Brown, Brown2 Dark, Orange, Yellow

(Available in 2g syringe)
hri enamel

hri intensive

Patented by Dr. Lorenzo Vanini

ENA Shiny finishing and polishing kit

Bring Micerium restorations to a lustrous polish using the “Shiny” polishing system. “Shiny” is a fast 3-step system using diamond and aluminum oxide polishing pastes. It is designed specifically for this nano-hybrid composite and will quickly polish restorations while preserving the anatomy created.

  • 1 – 0.5gm diamond paste SHINY A 3µm
  • 1 – 0.5g diamond paste SHINY B 1µm
  • 1 – 4g Shiny paste SHINY C
  • 2 – goat hair brushes RA
  • 1 – felt disc SHINY FD
  • 1 – felt wheel SHINY F
  • 1 – mandrel RA
  • 2 – tips air block SHINY G
  • 1 – rubber point SHINY

ena shiny

ENA HRi shade guide

ena hri shade guide

Silicone brush sets – sterilizable (clinical)

  • 5 – blue tips brush with metal handle (45° / 45°)
  • 5 – blue tips brush with metal handle (90° / 180°)
  • 5 – blue tips brush refill (sterilizable)

Silicone brush sets – non sterilizable (lab)

  • 5 – soft white silicone brush (small tip)
  • 5 – hard black silicone brush (small tip)

Modelling brushes – sterilizable

  • 1 – hair brush for stains
  • 1 – hair brush for anatomy
  • 1 – hair brush for sculpting

micerium brushs

micerium brushs

micerium brushs

Dr. Vanini book on anterior restorations

Dr. Lorenzo Vanini book – Conservative Restoration of Anterior Teeth

vanini book

It is possible to mix and match both ENA HRi® and ENA HRi® Bio Function to meet all your needs for biocompatibility, wear resistance and esthetic results.

ena hri bio function BPA-FREE composite
ena hri Vanini Stratification Technique
ena hri flow “No Bubbles” Formulation
ena matrix Anatomical Sectional Matrices & Wedge System