Trust
your crown and bridge work to Logipost®
ISO!
Optimal
post shape:
The
Logipost® ISO shape
Logipost® ISO offer a traditional
.02 ISO taper throughout the
length of the post. It is ideal
for narrower canals and is an
easy replacement to the widely
used parallel post designs.1
1. Shadman
S., Sadat Sabei N., Gardus M.,
et al. - Endo-composipost
UM canal adaptation in endondontically
treated teeth. Supervised project. - University of Montreal. -
1999 |
|
Learn
More:
Fiber
posts – the beginning:
Unlike metal or
ceramic, fiber posts exbibit
physical properties that are
very similar to dentin. This
reduces stress transmission
to the root, avoiding the possible
irreversible longtitudinal fracture
associated with other materials.
Early clinical studies by Mannoci
and Ferrari showed a 9% root
fracture rate with cast posts
at 4 years vs. a 0% fracture
rate with fiber posts at 4 years. |
Learn
More:
Choosing
the right post size:
When using parallel
or non-anatomical posts, clinicians
often have selected the smallest
post possible in order to
conserve remaining dentition.
This choice has also been
influenced by the rigidity
of steel or titanium. With
anatomical fiber posts (DT
and ISO), the clinician can
select a larger post size
without risk of root fracture
and without reducing remaining
tooth structure. |
Optimal
post material
Eliminate
Root Fractures with Logipost®
ISO
Logipost® ISO is manufactured
from advanced glass fibers in
a UDMA matrix. The modulus of
elasticity closely resembles
that of natural dentin, thus
preventing the transmission
of occlusal forces to the root.
Stainless steel, zircanium and
titanium posts transmit occlusal
forces to the root, increasing
the risk of root fracture.3
2. Asmussen
E., Peutzfeld A., Heitmann T.
- Stiffness, elastic limit
and strength of newer types
of endodontic posts. -
J. Dent, 27. - 1999. - 275-278 |
|
Comparative
analysis of modulus of elasticity
(GPa)
| |
A: Dentin
B: Logipost® ISO
C: Titanium
D: Stainless steel
E: Zirconium oxyde |
|
Ideal
under Esthetic restorations
The translucent-white color
of
DT Post® and Logipost®
ISO is invisible under all modern
esthetic crown and bridge materials. |
|
|
2
Million cycles of fatigue resistance
testing without failure*
Dental Materials Volume 21,
issue 2, February 2005, pages
75-82
– ALL other
post systems failed
*Base
on the materials used to make
an earlier version of DT Post®
and Logipost® ISO |
|
|
Up
to 229% more force required
to break!
CRANEWS, May 2004*
Logipost® ISO required a
force of up to 229% greater
to break than other posts Evaluated.d
*Base
on the materials used to make
an earlier version of DT Post®
and Logipost® ISO |
|
|
NEW! Higher
radiocapity:
The number 1 complaint of previous
fiber post systems is the difficulty
of detecting the post on a radiograph.
DT Post® and Logipost®
ISO now have a considerably
higher level of radiopacity.
X: RTD
Light Post®
Y: NEW DT Post®
Z: FiberKor Post™ |
|
|
NEW! Epoxy-free!
New Logipost®
ISO use a UDMA resin matrix, well
documented for its excellent biocompatibility.3
3. RadTech Europe 2005 Conference
& Exhibition
Excellent
light transmission for use with
dual-cure resins
DT Post® and Logipost®
ISO offer excellent light transmission
through the optic fiber material. |
|
|
NEW! Higher
Bond Strengths with self-adhesive
resin cements
In a recent comparative study,
DT Post® exhibited between
15% and 63% higher microtensile
bond strength, depending on
the brand of self-adhesive resin
cement that was used.4*
*DT Post® and Logipost®
ISO are made from the same material.
NEW! Easier
to use
DT Post® and Logipost®
ISO offered the same adhesion
without any surface treatment,
or with treatment of either
alcohol or H2O2 and silanization for 60 seconds.4
4, Julio
Mesquita Filho. - University
of Toronto in association with
University Est. Paulista. -
Sao Paulo, Brazil. - 2007 |
|
Microtensile
Bond Strength (MPa) |
| |
 |
| |
| |
A:
Unicem*
B: Biscem*
C: Maxcem*
D: Panavia F* |
| |
|
| |
*Trademarks
of their repective
manufacturers |
|
|
Learn
More:
How
can fiber posts be compared?
Unlike metal
posts which exhibit identical
physical properties from brand
to brand, the quality of fiber
posts is subject to a wide
variation. When a fiber post
fractures, it is really the
resin/glass fiber interface
that is de-bonding. The first
test that is used to Evaluate
the manufacturing quality
is a standard fracture load
test (e.g. CRA), which shows
how much force is required
to break the post. The second
test simulates de-bonding
under repeated load (Dental
Materials). This tests the
post’s ability to withstand
occlusal forces over time. |
Try
Logipost® ISO in your practice
for 30 days risk-free!
We’re convinced that you’ll
join the thousands of practitioners
around the world that are using UDMA
advanced fiber posts. If for whatever
reason you’re not completely
satisfied with the results of using
Logipost® ISO, simply call us
and we will arrange for a pick-up
and complete credit to your account.
Logipost®
ISO kit includes:
•
6 - Logipost®
ISO 90
•
6 - Logipost®
ISO 100
•
6 - Logipost®
ISO 120
•
1 reamer
80
•
1 reamer
90
•
1 reamer
100
•
1 reamer
120
•
Instructions
and accessories.
|
|
| |
Refills:
•
10 - Logipost®
ISO 90
•
10 - Logipost®
ISO 100
•
10 - Logipost®
ISO 120
•
1 reamer
80
•
1 reamer
90
•
1 reamer
100
•
1 reamer
120
|
|
Lot number:
For implanted devices, it is recommended to register the lot number in the patient’s chart.
Buy
Now!
|
|
