When
low cost meets top quality
Bond-1® is the simple-to-use 5th
generation single bottle bonding system
from Pentron® Clinical Technologies.
With years of clinical success since its
launch in 1996, Bond-1® receives top
ratings in numerous independent Evaluations.
Professionals
agree:
“Bond-1® is highly effective
in forming a hybrid zone and preventing
post-operative sensitivity and minimizing
microleakage.”
Dr. Karl Leinfelder,
D.D.S., M.S. (Data on file)
“Bond-1® exhibits high bond strengths
to all current materials, up to 31 MPa.”
Dr. J. Powers,
University of Texas (Data on file)
Photograph
of actual bond strength test sample
of Bond-1®.
Note that the failure is cohesive
within the dentin. The bond is actually
stronger than the underlying tooth. |
 |
Bond-1®
delivers an unsurpassed set of advantages
The combination of proven dentin adhesives
(PMGDM, HEMA) in an acetone carrier provides:
- superior penetration
of the bonding resin into the dentinal
tubules and hybrid layer
- a strong bond because
of an intimate contact between resin
and tooth structure
- elimination of post-operative
sensitivity
- faster air drying after
application of Bond-1®
- minimization of microleakage.
Bond-1® is not a filled bonding resin.
In addition to superior penetration, this
ensures a lower film thickness (5 microns),
allowing for a wider range of applications.
Bond-1® has
several applications:
- It is suitable for all
direct restorations
- It will cure in indirect
applications when used in conjunction
with Pentron® Clinical Technologies
resin cements
- It is ideal for bonding
non-retentive posts and crowns
- It is indicated for bonding
amalgams when used in conjunction with
AmalgaCure®
- It is ideal for bonding
fiber post technology DT Post in conjunction
with Cement-It!® Universal C&B.
Properties:
Bond strength
(MPa)
|
Moist dentin: |
31.0 |
|
Lute-It!® Dual-cure
cement: |
36.8
(12.15) |
|
Rexillium III (non-precious
metal): |
28.0
(4.8) |
|
Naturelle (semi-precious
metal): |
20.9
(4.2) |
|
RxC (gold-precious
metal): |
18.0
(4.1) |
Ingredients:
Etchants: Phosphoric acid, non-silicate based,
water-soluble polymer thickening agent.
Primer/Adhesive: PMGDM, HEMA, light curing
initiator, and acetone.
Water compatibility: Hydrophilic
Light curing: 10 seconds
Bond-1®
kit includes
• 1 - 4ml bottle
of Bond-1® Primer/Adhesive
• 2 - 5ml syringes
etch, 37% phosphoric acid
• Instructions,
MSDS & accessories:
|
|
| |
Refills:
•
1 - 6ml bottle
of Bond-1®
Primer/Adhesive
• 2 - 5ml
syringes etch,
37 % phosphoric
acid
|
|
Bond-1®
C&B:
Bond-1® C&B
contains an ethanol solvent as opposed
to the acetone solvent in Bond-1®.
Ethanol is a slower acting solvent
which provides a longer working time
(indicated for crown and bridge bonding
procedures).
Bond-1® C&B may provide a
longer useful shelf life than regular
Bond-1®*.
The choice is now yours – ethanol
solvent or acetone solvent. In either
case, you will benefit from one of
the leading 5th generation
bonding systems at a fraction of the
cost of other systems.
*Perdigao
J, Swift EJ, Lopes GC. Effects of
repeated use on bond strengths of
one bottle adhesives. Quintessence
International 1999 Dec; 30 (12):819-823
Buy Now!
|
|
